The Kraissl Company

Phone: 201-342-0008
Fax: 201-342-0025

FORM - Request Quote or Information: Kraissl Pump

Welcome to the Interactive Section of the Kraissl website. Here's where you can quickly & easily submit an Online RFQ (Request For Quote) for Kraissl products. When you've finished providing your contact information, you can simply click SEND RFQ to email your inquiry OR, if your prefer, print out and fax this page to 201-342-0025

*YOUR NAME:

*YOUR EMAIL:

*COMPANY NAME:

*PHONE:

*STATE:

COUNTRY:


Address: (include country)


Fax::

Pump Checklist:
Please consider the factors listed below when selecting a pump. Use this area below to fill-in this information where known. We will help you find the Kraissl pump to suit your specific application.

1. Fluid to be pumped:
2. Density of fluid:
3. Viscosity of fluid:
4. Fluid working pressure:
    Maximum working pressure:
5. Fluid working temp:
    Maximum temp:
6. Pump shaft speed, RPM:
7. Flow rate, gallons per hour:
8. Electric motor:
Horse power:
RPM:
Voltage:
Phase:
Hz/Cycles:
NEMA motor frame number:
Suggested Specifications:

The transfer pump shall have a cast iron housing with NPT (pipe size) inlet/outlet ports, and suitable for PSIG operating pressure at °F operating temperature, and gallons per hour.

The pump set shall be drive, for RPM pump shaft operating speed.

The electric motor shall be HP, RPM, Volts, Hz, Phase, , motor frame number.

Transfer pumps shall be U.L. listed Kraissl Model 60 or approved equivalent.

How did you find our website? (select one)








Please add any other comments below you feel would be helpful:


           

Help Us Help You: areas below in *CAPITAL LETTERS must be filled out in order for us to quickly & effectively respond

Important: after clicking SEND RFQ button above, click your browser back button to return to website
Phone: 201-342-0008
Fax: 201-342-0025
Copyright © 2008 ~ The Kraissl Company - Hackensack, NJ — American Manufacturer of Industrial/Commercial Strainers, Filters, Valves & Pumps