Please fill out the information on this Transfer Valves Request Form, click the PRINT button at the bottom and then FAX to 201-342-0025, and we will respond. Thank you for your interest in Kraissl Transfer Valves.
Please provide your contact information as follows:
Your Company:
Your Name:
Email:
Phone:
Fax:
Address:
City:
State:
Zip Code:
-
Country:
Transfer Valve Checklist:
Please consider the factors listed below when selecting a transfer (diverter) valve. Use this page and fill-in this information where known. We will help you find the Kraissl transfer valve to suit your specific application.
1. Fluid to be handled:
2. Density of fluid:
3. Viscosity of fluid:
4. Fluid working pressure:
Maximum working pressure:
5. Fluid working temp:
Maximum temp:
6. Material of valve body construction:
7. Material of valve plug and stem
8. Existing Pipeline size and material:
9. Inlet/outlet port location (opposed, or same size):
10. Clearance limitations
Above:
Below
left side facing inlet:
right side facing inlet:
11. Maximum pressure drop allowed, PSI:
12. Any other information:
Suggested Specifications:
The transfer (diverter) shall have cast metal bodies with
(pipe size) inlet/outlet ports.
The transfer valve shall have
(flanged , threaded, etc.) end port connections with inlet and outlet ports located on
as each other.
The transfer valve body shall be fitted with threaded NPT drain plugs, and suitable for
psig operating pressure at
F operating temperature.
The valve body shall be composed of cast
The valve plug and stem (trim) shall be constructed of
.
Transfer valves shall be U.L. listed Kraissl Model #72AA or approved equal.
